Primary Framing

Zamil Steel pre-engineered buildings are custom-designed to meet your exact requirements. The most common Primary Framing systems are shown below. Practically any frame geometry is possible. Consult a Zamil Steel representative for your specific requirements.

Minimum yield strength is 34.5 kN/ cm2

Primary MembersAt Zamil Steel we can produce other non-standard main frames, of almost any configuration, if required.

High grade steel plate conforming to ASTM A 572M Grade 345. Factory painted with a minimum of 35 microns (DFT) of corrosion protection primer.

Clear Span
Building without interior columns – maximum practical width = 90 m

Clear-Span (Arched)
Arched Clear-Span – maximum practical width = 90 m

Lean-To
Maximum practical width = 24 m

Multi Gable
Maximum practical module width = 80 m

Multi-Span I
Building with one interior column – maximum practical module width = 70 m

Multi-Span III
Building with three interior columns – maximum practical module width = 70 m

Single Slope
Building without interior columns – maximum practical width = 50 m